Forum Replies Created

  • Re: Reply To: Parameter error (0x9E) when adding additional access rights to a file on EV2

    16. July 2018 at 12:44     in reply to: Parameter error (0x9E) when adding additional access rights to a file on EV2

    kloveman
    I have figured out where I was going wrong. In my additional AR settings I had set the change access rights to use key 0. This was the mistake I was making. There can only be one setting of the change access rights (when the file is created). Further access rights should be set to no access (0xF). After I made this change the command worked correctly.

    I'm leaving this for anyone else who gets stuck and may find it useful.

    KL
    + 0  |  - 0

    Re: Reply To: Parameter error (0x9E) when adding additional access rights to a file on EV2

    16. July 2018 at 11:24     in reply to: Parameter error (0x9E) when adding additional access rights to a file on EV2

    kloveman
    Some additional information: I have also tried to complete this in the RFIDDiscover tool and am getting the same error. This leads me to believe it's something in my card application setting that I have missed.
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)