Forum Replies Created

  • Re: Reply To: SAM_LockUnlock command

    31. January 2018 at 17:53     in reply to: SAM_LockUnlock command

    Ahmad
    Hi,
    Thanks for your response
    we can authenticate the Desfire EV1 card with SAM AV2 directly no need to LockUnclock the SAM ? or it is required.
    How i know that SAM is in x-mode or non x-mode?
    + 0  |  - 0

    Re: Reply To: Authentication between Desfire EV1 and SAM AV2

    23. January 2018 at 15:37     in reply to: Authentication between Desfire EV1 and SAM AV2

    Ahmad
    Hi thank you for your reply
    can you please provide the document "P5DF081 – MIFARE Secure Access Module SAM AV2"
    + 0  |  - 0

    Re: Reply To: Authentication between Desfire EV1 and SAM AV2

    23. January 2018 at 9:42     in reply to: Authentication between Desfire EV1 and SAM AV2

    Ahmad
    Hi,
    Thanks for your reply
    i don't have application note “AN1826 – MIFARE SAM AV2 – For MIFARE DESFire EV1"
    still i am not getting what does mean by "0A 01 01" in the command 80 0A 00 00 0A 01 01 BF BC 59 EF B2 90 26 51 00
    + 0  |  - 0

    Re: Reply To: Authentication between Desfire EV1 and SAM AV2

    19. January 2018 at 15:11     in reply to: Authentication between Desfire EV1 and SAM AV2

    Ahmad
    I need some clarification In this command -80 0A 00 00 0A 01 01 BF BC 59 EF B2 90 26 51 00 after 0A(Data Length) what is 01 01?
    + 0  |  - 0
  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)