Sample program for SAM configuration when using MIFARE SAM AV2

Forum / MIFARE general topics and applications / Sample program for SAM configuration when using MIFARE SAM AV2

  • 27. April 2017 at 6:14
    Dear All,

    I have two different questions in mind even though the topic refer one question.
    1. Where can I order MIFARE SAM AV2 pieces

    2. Where can I find a sample program for SAM authentication and other relevant codes required in developing a program to read and write to DESFire ev2 card?


    Your consideration about this is highly appreciated.
    Thank You.
    WBR.
    Malshan Anthony
    + 0  |  - 0

    Re: Sample program for SAM configuration when using MIFARE SAM AV2

    27. April 2017 at 10:01
    Hello Malshan,

    You can get the products and datasheet from AdvanIDe:

    http://www.advanide.com/

    You have to sign a NDA before you get access to the datasheets.

    Regards,
    The TapLinx team

    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.