Mifare plus s 2k activate card

Forum / MIFARE general topics and applications / Mifare plus s 2k activate card

  • 2. October 2018 at 12:56

    Ayman Eldyasty
    Dears,

    I am a newer in using mifare plus s 2k and I want to activate the card according to REQA and RATS.

    I am using winscard.dll and also SCM SCL011 reader.


    Can any one help me how to activate the mifare plus s 2k with APUD command?

    Thanks in advance
    + 0  |  - 0

    Re: Mifare plus s 2k activate card

    5. October 2018 at 9:38

    TapLinx Support
    Hi Ayman,

    Usually the driver of your NFC reader will try to find out which card is in the field. Then you should use the PC/SC interface to communicate with the card.

    The MIFARE Plus S can be in different security levels (SL) which also implies different protocol layers. For instance, a unprepared card is in SL = 0 and the Plus uses MIFARE Classic protocol (ISO14443-3). In SL = 3 the Plus uses ISO14443-4 protocol.

    For some NFC readers the manufacturer allows to control the interface with proprietary commands, if this is not covered with PC/SC commands. You need the user manual of your reader to check if such proprietary commands exist.

    Regards,
    The TapLinx team
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.