Get Key Entry – Problem

Forum / MIFARE SmartCard IC`s / Get Key Entry – Problem

  • 18. November 2019 at 21:54
    Hi, I'm so sorry for asking so many questions.
    I tried to do the command: 80 64 45 00 00 [/ b]
    but the SAM response was: 69 84 [/ b]
    By documentation, it means: invalid reference data (key entry or invalid CRC KUC).
    I checked the KUC and the limit is FFFFFFFF [/ b]
    The question is: How do I solve this?
    + 1  |  - 0

    Re: Get Key Entry – Problem

    20. November 2019 at 16:40
    Hi Marcelo,

    I cannot write about details of NDA classified material on a public server. I will answer you via email. In such questions you can reach me via: taplinx@nxp.com.

    The TapLinx team

    + 1  |  - 0

    Re: Get Key Entry – Problem

    23. September 2021 at 8:21
    Hello everybody,

    It's nice being here with you in your big family. My name is Rajesh and I'm the marketing head in Technology Counter , a Indian software solution company.

    Thank you very much and hope to share a lot of useful information here!

    Basically I'm looking for introduction/ new member thread in this forum but I didn't get it.

    So it will be really help me a lot if admin/any one from this forum can give guideline or related link.

    Thanks & Regards
    Rajesh
    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.