DESFire EV1 SelectApplication Command

Forum / MIFARE general topics and applications / DESFire EV1 SelectApplication Command

  • 10. October 2017 at 16:56
    Forum cuts text :( i try to repost log.
    B7 [Version]
    92
    01 0F 11 3D 2D 30 2C 00 2A 8D 2B 3E 14 83 26 70 15 40 [Init]
    52 01 0C 0D 87 [Send REQA]
    44 03
    93 20 01 0C 0D 80 [Anticol]
    88 04 5E 6F BD
    93 70 88 04 5E 6F BD 01 03 01 00 [Calculate CRC]
    A2 A1 [GET CRC]
    0E 60
    93 70 88 04 5E 6F BD 0E 60 01 0C 0D 80 [Select]
    24 D8 36
    95 20 01 0C 0D 80 [Anticol]
    DA 49 34 80 27
    95 70 DA 49 34 80 27 01 03 01 00 [Calculate CRC]
    A2 A1 [GET CRC]
    A4 E1
    95 70 DA 49 34 80 27 A4 E1 01 0C 0D 80 [Select]
    20 FC 70
    0A 80 [Clear FIFO]
    E0 20 01 03 01 00 [Calculate CRC]
    A2 A1 [GET CRC]
    3B D6
    E0 20 3B D6 01 0C 0D 80 [Send RATS]
    06 75 77 81 02 80 02 F0
    02 60 01 03 01 00 [Calculate CRC]
    A2 A1 [GET CRC]
    16 4E
    02 60 16 4E 01 0C 0D 80 [Send]
    02 AF 04 01 01 01 00 18 05 88 B9 DA DA DA
    + 0  |  - 0

    Re: DESFire EV1 SelectApplication Command

    12. October 2017 at 10:40
    Hi Stanislav,

    The reader manufacturer defines, how the APDU commands are wrapped and which card type is supported (and which not). You have to use the programmer/developer manual and check the wrapping commands for each card type.

    The TapLinx team

    + 0  |  - 0

    Re: DESFire EV1 SelectApplication Command

    20. October 2017 at 6:47
    thanks
    + 0  |  - 0
Viewing 3 posts - 16 through 18 (of 18 total)

You must be logged in to reply to this topic.