Forum › MIFARE general topics and applications › win SDK for NTAG216 ? › Reply To: win SDK for NTAG216 ?
Hi Mark,
Unfortunately we do not have an out-of-the-box solution for you. Our reader library is for operating with our NFC reader chips directly, but it does not operate with the PC/SC interface.
I recommend to use a standard reader product. But you should check the manuals before. To operate with the NTag216 you have to use the ISO 14443-A Part 3 interface with is handled with separate commands. For instance for the HID Omnikey reader you have to open a so called generic session , send all commands as generic card commands and at the end you have to close the generic session. Generic commands wrap target APDU commands into a generic APDU command.
My recommendation is: check the manuals of the NFC reader manufacturers how they implement the ISO 14443-A Part 3 communication. If you find it is properly supported, choose this reader for your project.
Kind regards,
The MIFARE Team
Unfortunately we do not have an out-of-the-box solution for you. Our reader library is for operating with our NFC reader chips directly, but it does not operate with the PC/SC interface.
I recommend to use a standard reader product. But you should check the manuals before. To operate with the NTag216 you have to use the ISO 14443-A Part 3 interface with is handled with separate commands. For instance for the HID Omnikey reader you have to open a so called generic session , send all commands as generic card commands and at the end you have to close the generic session. Generic commands wrap target APDU commands into a generic APDU command.
My recommendation is: check the manuals of the NFC reader manufacturers how they implement the ISO 14443-A Part 3 communication. If you find it is properly supported, choose this reader for your project.
Kind regards,
The MIFARE Team
+ 0
|
- 0