Forum › MIFARE SDK › NTAG213 Tranceive error and TAG lost exception seen › Reply To: NTAG213 Tranceive error and TAG lost exception seen
Hi Anitha,
The TapLinx layer for the NTAG devices is quite thin. It reflects the registers which are listed in the datasheet:
https://www.nxp.com/docs/en/data-sheet/NTAG213_215_216.pdf
It is a good idea to take the datasheet as first reference to verify your configuration. The password verification is explained in section 8.8 on page 30 of the datasheet.
The TapLinx team
The TapLinx layer for the NTAG devices is quite thin. It reflects the registers which are listed in the datasheet:
https://www.nxp.com/docs/en/data-sheet/NTAG213_215_216.pdf
It is a good idea to take the datasheet as first reference to verify your configuration. The password verification is explained in section 8.8 on page 30 of the datasheet.
The TapLinx team
+ 0
|
- 0