Forum › MIFARE SmartCard IC`s › Master key from AES mode to Native DES (after Format card) › Reply To: Master key from AES mode to Native DES (after Format card)
Hi André,
You must use the change key command and change also the cipher from AES to 2K3DES. I recommend reading the application note:
AN0945 MIFARE DESFire EV1 – Features and Hints. Here you will find calculated examples of change key.
The TapLinx team
You must use the change key command and change also the cipher from AES to 2K3DES. I recommend reading the application note:
AN0945 MIFARE DESFire EV1 – Features and Hints. Here you will find calculated examples of change key.
The TapLinx team
+ 0
|
- 0