Reply To: SL3 switch by command query

[Tithi Patel]

I understand that you're operating MIFARE SAM AV2 in non-X-mode. Is that correct?

[Tithi] Yes

Then, you authenticate to key 9003 with command 70039000.

[Tithi] Yes

If the card that you're addressing is a MIFARE Plus S, SE or X, the command is correct. If the card is a MIFARE Plus EV1, then is wrong.

[Tithi] It is MIFARE Plus X

FFA00005270100F3000064 I do not understand. What is this?

[Tithi] We are using HID Omnikey 6321 which requires Generic APDU wrapper to be used for non-ISO apdus

Finally, what is the issue you're reporting? That the answer from the card to command AuthenticateContinue is just 9000h and does not include the extra bytes payload with TI, RndA', PDcap2 and PCDcap2 or that the execution of the second part of the SAM_AuthenticateMFP (80A30000...) answers with 9000?

[Tithi] The issue is, the answer from the card to command AuthenticateContinue is just 9000h and does not include the extra bytes payload with TI, RndA', PDcap2 and PCDcap2

Hope the above helps!

---

+ 0  |  - 0