Forum › MIFARE SmartCard IC`s › SAM_LockUnlock command › Reply To: SAM_LockUnlock command
Hi Ahmad,
You need the host mode only to prepare the MIFARE SAM AV2 with card keys. Later, the SAM will do the authentication autonomously in X mode. Or it is handled by your micro controller software (non-X mode). Which mode do you use depends from your application.
The TapLinx team
You need the host mode only to prepare the MIFARE SAM AV2 with card keys. Later, the SAM will do the authentication autonomously in X mode. Or it is handled by your micro controller software (non-X mode). Which mode do you use depends from your application.
The TapLinx team
+ 0
|
- 0