Forum › MIFARE SDK › Help with authentication on DESFireEV1 card › Reply To: Help with authentication on DESFireEV1 card
Thanks for the reply Christian.
As can be seen in the initial post I used this method for selecting the application.
Then I did an authentication using the following method.
Is that not enough or the correct way to do this?
Error message I get is thrown when trying to authenticate with the code above.
Data is stored something like this.
Is it possible to authenticate with different keys for the same application in order to access the different files stored there?
As can be seen in the initial post I used this method for selecting the application.
_objDESFireEV1.selectApplication( 6 );
Then I did an authentication using the following method.
_objDESFireEV1.authenticate( 0, IDESFireEV1.AuthType.AES, KeyType.AES128, keyData);
Is that not enough or the correct way to do this?
Error message I get is thrown when trying to authenticate with the code above.
Data is stored something like this.
Application File Key
X A 112233AA112233AA112233AA
X B 445566BB445566BB445566BB
X C 778899CC778899CC778899CC
Is it possible to authenticate with different keys for the same application in order to access the different files stored there?
+ 0
|
- 0