Forum › MIFARE and NFC Reader IC`s › Create file in mifare desfire › Reply To: Create file in mifare desfire
Hi Pradip,
Byte offset 1 defines the communication settings. You have set “fully enciphered communication”. In this case you have to set the correct access rights (byte offset 2, 3) for reading, writing, etc. In your case you have to use the application master key (key #0) to authenticate before you can write or read. Is it what you want to do?
The MIFARE Team
Byte offset 1 defines the communication settings. You have set “fully enciphered communication”. In this case you have to set the correct access rights (byte offset 2, 3) for reading, writing, etc. In your case you have to use the application master key (key #0) to authenticate before you can write or read. Is it what you want to do?
The MIFARE Team
+ 0
|
- 0