Forum Replies Created
-
Re: Reply To: Does RC522 support Mifare DESfire EV1 Card?
27. December 2016 at 17:57 in reply to: Does RC522 support Mifare DESfire EV1 Card?yes the reader supports DesFire EV1 read/write
Steve
+ 0 | - 0
Re: Reply To: Problems authenticating UltralightC when using new TapLinx with Android 6
18. November 2016 at 20:03 in reply to: Problems authenticating UltralightC when using new TapLinx with Android 6Is there any update regarding this bug?
Steve
+ 0 | - 0
Re: Reply To: Unites States Customers
26. September 2016 at 20:45 in reply to: Unites States CustomersSorry, I cannot help you with the website. I was referring to registering and downloading the SDK to get started. As far as the starter kit, you should be able to find a re-seller in the US that sells the same items as in that package.
Steve
+ 0 | - 0
Re: Reply To: Unites States Customers
26. September 2016 at 15:57 in reply to: Unites States CustomersYou can start by visiting the thread titled - 5 Steps to start coding with TapLinx. In it you will find the steps to start programming with the new SDK
+ 0 | - 0
Re: Reply To: MifareDesfire EV1 ChangeKey always returns 0x1E
19. September 2016 at 20:42 in reply to: MifareDesfire EV1 ChangeKey always returns 0x1EYour CRC32 calculation is using the wrong poly. The poly you should be using is 0xEDB88320
+ 0 | - 0
Since the keys are still stored in the source code before adding them to the key store couldn't someone decompile the apk file and still have access to the keys?
+ 0 | - 0
Close this, figured it out.
+ 0 | - 0
David,
Thanks for the reply. The onpause and onresume are in there, I am not sure why it did not post. The manifest looks right to me, it is taken right from the lite sample app. I believe it is a problem with lollipop. I do not have another phone to try it on though.
Steve
+ 0 | - 0
I still haven't got the SDK to run on a Samsun S6 with lollipop. I started playing around with programming and it never gets to the intent. I get no errors what so ever and I have fresh EV1 cards right from the manufacturer.
Here is the stub of code that I am using.
http://pastebin.com/ULKMizvi
Steve
+ 0 | - 0
Thank you for the reply. What app did you download from the Playstore to try. The one that I donwloaded was the Mifare SDK app.
Steve
+ 0 | - 0
I was just using the sample app from the sdk on my phone and also the one from the play store. There is no error at all. When I put the card on the phone it does nothing. I have not tried programming with the SDK as of yet, have not had time.
Steve
+ 0 | - 0
Has anyone got the SDK to work with a Samsung Galaxy phone and a DesFire EV1 card? I came home and put the demo app on my S3 that has IceCream on it and I still get the same results, nothing. I guess I will write an app and just see if it is connecting to the card unless I hear from someone else in the next hour or so.
Thanks,
Steve
+ 0 | - 0
David,
Thank you for the information. I am well aware that it would not work with a personalized University card. These are blank cards that came right from the manufacturer. I can view these cards no problems using standard APDU commands. I am just checking out the SDK and it seems to have a problem with the Lollipop version. I have another phone at home that has Ice Cream on it that I will try tonight. I was just wondering if someone new of existing problems with Lollipop and the SDK.
+ 0 | - 0
Thank you for the response. I do have "real" EV1 cards, we use that at a University I do work for. I guess I will look at a different phone and check that out. I would appreciate any other follow up.
+ 0 | - 0
-
AuthorPosts
Viewing 14 posts - 1 through 14 (of 14 total)