Forum Replies Created

  • Re: Reply To: Authentication Flow with SAM AV1

    6. February 2017 at 13:52
    in reply to: Authentication Flow with SAM AV1
    Thanks you for your quick response very much appreciated.

    So now which SAM_authenticate commands needs to be triggered to authenticate a DESFIRE EV1 card with 3DES keys for authentication and also please help us in understanding the difference between various authenticate commands as listed below in product datasheet document.

    1. SAM_AuthenticatePICC
    2. SAM_AuthenticateMIFARE
    3. SAM_ISOAuthenticatePICC
    4. SAM_ISOExternalAuthenticate
    5. SAM_IsoInternalAuthenticate.

    When we use which command for authentication with the SAM module.
    + 0  |  - 0

    Re: Reply To: Authentication Flow with SAM AV1

    4. February 2017 at 17:28
    in reply to: Authentication Flow with SAM AV1
    Please also let me know on how to set the SAM communication in Non-X mode.
    + 0  |  - 0

    Re: Reply To: Authentication Flow with SAM AV1

    4. February 2017 at 10:22
    in reply to: Authentication Flow with SAM AV1
    Thanks for your response.

    Do you need to do authenticate_host before we do an authenticate_PICC or we can directly do an authenticate_PICC by selecting the application in SAM. and also please let us know the difference between Authenticate_Host and Authenticate_PICC in Non-X mode.

    Thanks.

    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)