Forum Replies Created

  • Re: Reply To: Mutual Three Pass Authentication with TapLinx

    28. December 2016 at 18:40     in reply to: Mutual Three Pass Authentication with TapLinx

    Jeong
    Thanks, I will send them an email.

    Do you have any resources on how to implement this using the byte sequence?
    + 0  |  - 0

    Re: Reply To: Mutual Three Pass Authentication with TapLinx

    27. December 2016 at 20:34     in reply to: Mutual Three Pass Authentication with TapLinx

    Jeong
    Thanks for the response.

    In that case, are there alternative methods I could use to facilitate the case I described in my original post?
    Would I have to use the native commands? If so, are there any resources you could point me to help me get started?

    Also, I've heard that the native commands is locked under a NDA, where should I email to get this NDA to sign?

    Best,
    Jeong
    + 0  |  - 0

    Re: Reply To: Starting Development, Help with DESFire EV1 (Basics)

    22. December 2016 at 3:18     in reply to: Starting Development, Help with DESFire EV1 (Basics)

    Jeong
    Hey, I just started using Taplinx for the first time as well.

    Here are the resources that helped me get started:

    1) The javadoc: https://www.mifare.net/developer/javadoc/
    2) The application note which helps you set up your android studio: https://www.mifare.net/en/products/tools/taplinx-application-note/
    3) The sample application which has examples on how to read the different cards: https://www.mifare.net/wp-content/uploads/2016/08/SrcsampleNxpNfcLib-1.0.zip

    Hope it helps!
    + 0  |  - 0
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)