Forum Replies Created

  • Re: Reply To: Integrating iOS

    10. January 2023 at 10:45
    in reply to: Integrating iOS
    Hi, I think the software zip folder is missing the static library .a file.
    + 0  |  - 0

    Re: Re: Mifare authentication APDU

    17. September 2013 at 2:44
    in reply to: Mifare authentication APDU
    I believe you are working under the PCSC environment, then you should refer to the PCSC specifications part 3 under the section 3.2.2. In this section, there are a fews APDU commands that you could use to work with MIFARE Classic.
    + 0  |  - 0

    Re: Re: MIFARE ICODE OEM

    5. September 2013 at 2:34
    in reply to: MIFARE ICODE OEM
    Hi,
    The Tx and Rx pins are for the antenna connectivity and it is definitely not similar to the UART interface (Tx and Rx). Sorry to confuse you.
    + 0  |  - 0

    Re: Re: Different numbers being read on different types of readers

    6. March 2013 at 4:25
    in reply to: Different numbers being read on different types of readers
    Hi JimSmith,
    I assume that your PAC Door Entry System Reader and Equirtrac Printing Solution Reader are two different reader maker. I also assume that both two readers are reading UID of MIFARE card and you could verify this by checking individual reader supplier. I could think one of possibility of your problem is the 4 byte of the UIDs sequence order. Example PAC Reader reads the 4 byte UIDs as 4CDDA15F(1289593183) but the Equitrac Reader may reads the 4 byte of UID as 5FA1DD4C(1604443468).
    + 0  |  - 0
Viewing 4 posts - 1 through 4 (of 4 total)