Forum Replies Created

  • Re: Reply To: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication

    13. January 2020 at 11:03
    in reply to: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication
    Hi,

    Thank you, I understand that.
    My question was more aimed at the authentication, does it matter if EV1 or EV2 authentication is used for the FinalizeKeySet command?
    E.G. Can I use the FinalizeKeySet on an EV2 card if I am authenticated using EV1?

    Regards,
    Jacques
    + 0  |  - 0

    Re: Reply To: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication

    11. January 2020 at 23:57
    in reply to: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication
    Hi,

    Thank you for your reply.
    Are the InitializeKeySet, FinalizeKeySet, and RollKeySet functions only available when EV2 authentication is active or are they available when EV1 authentication is active?

    Regards,
    Jacques
    + 0  |  - 0

    Re: Reply To: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication

    9. December 2019 at 9:33
    in reply to: MIFARE – Desfire EV2: FinalizeKeySet while using EV1 authentication
    Hi,

    Thank you for your prompt response.

    I have already tried that and it does not make a difference.
    Do you perhaps have a sample command for either FinalizeKeySet Or InitializeKeySet ?

    Regards,
    Jacques
    + 0  |  - 0

    Re: Reply To: MIFARE – Desfire EV2: Authenticate with 6A81 Response

    6. December 2019 at 15:20
    in reply to: MIFARE – Desfire EV2: Authenticate with 6A81 Response
    Thank you, you were correct.
    This was not related to the DesFire2.
    + 0  |  - 0
Viewing 4 posts - 1 through 4 (of 4 total)