Forum Replies Created

  • Re: Re: Different numbers being read on different types of readers

    8. April 2013 at 21:31     in reply to: Different numbers being read on different types of readers

    darrelsummers
    Thanks for the prompt reply! We will begin with the steps you suggested.

    Darrel Summers
    + 0  |  - 0

    Re: Re: Different numbers being read on different types of readers

    8. April 2013 at 18:37     in reply to: Different numbers being read on different types of readers

    darrelsummers
    Using an Equitrac reader we are seeing that the UID extracted from a card (decimal) does not match any of the numbers imprinted on the card. My customer has MIFARE cards which are pre-printed with numbers they use with their door entry system - first four digits of the number printed on the card equals a users "PIN". When we read the card into the equitrac system we receive a 20 digit length decimal value with no correspondence to the number printed on the card. Is this typical?
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)