AnxooeqParticipant
tir up the mixture, seal the lid, and put a label on it with the date. You will let this sit in a safe, cool, dark, dry place for about a month. After a month or so, take the jar out and stir it up thoroughly. Add about a tablespoon of fresh VG in order to keep the THC extraction process moving along. Stir/mix up again, and set aside in a safe place for another month. Repeat this same process, adding another tablespoon of fresh VG. Place back in a cool, safe place for one more month. (On a side note, feel free to mix/stir up the jar as frequently as you want during the three month period, even on a daily basis if you want. The more it is mixed up, the better). After the last month is up, take the mixture out and stir it up nicely with your stirring wand. Then, place your small wire mesh strainer over a clean glass jar (this one doesn’t need a seal), and dump the cannabis/VG mixture into the strainer. Let all of the VG drip through the strainer, using the rubber spatula to squeeze out as much remaining liquid as you can. Discard the raw cannabis material, clean off your mesh strainer, and then cover the strainer with about four layers of cheesecloth (you can also use a cotton muslin bag). Pour the cannabis/VG liquid mixture onto the cheesecloth or muslin bag, letting it drip through into a clean glass jar (you can use the same one that you did for the first filter as long as you clean it out) CBD oil.