Forum Replies Created

  • Re: Reply To: Can´t get Anticollision loop with two PICCs.

    21. October 2020 at 8:15
    in reply to: Can´t get Anticollision loop with two PICCs.
    Thank you for your reply.
    BR
    + 0  |  - 0

    Re: Reply To: Can´t get Anticollision loop with two PICCs.

    9. October 2020 at 12:51
    in reply to: Can´t get Anticollision loop with two PICCs.
    Thank you for your answer,

    I checked the firmware and I found a bug. It is fine now. However, I see that some pair of cards work better than others.

    I have a pair of tags where the collision is detected properly (CollErr flag from ErrorREG set) but then CollPoss bits (in CollReg) show the erroneous position of the collision. As I said, sometimes works fine and some others not. I am quite confused. Does is something to do with the MinLevel and CollLevel in RxThresholdReg? I don´t know how they shoul be configured.
    Could it be due to the gain? I configured to the the maximum.

    Thanks again for your help.

    BR.
    Aitor.
    + 0  |  - 0

    Re: Re: SAK response on the Classic next generation tags.

    18. October 2013 at 7:42
    in reply to: SAK response on the Classic next generation tags.
    Thank you Adnan,
    Everything is clear now.

    BR.
    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)