• 24. January 2017 at 11:53

    I have a problem, every time I format or create a std file the card returns me the following frame:
    0x80, 0x7, 0xf2, 0x1, 0x91, 0x40, 0x8, 0x0, 0x0.
    From which I deduce according to ISO14443-4 that it is an s-Block requesting the frame waiting time extension.
    The fact is that I can not send the response command correctly. According to the ISO the response must be a byte with the codification of the extended time that is calculated from the following equation: FWT (temp) = (WTXM * FWT). Which in my case turns out to be 0x3E.

    Many thanks in advance and greetings.
    + 0  |  - 0

    Re: WTX

    26. October 2019 at 19:43
    Support forum and advice is put for the advancement for the targeted elements for al individual. The skills of write my paper for me are introduced for all offers. The talent is demolished for the classic use of the improvement of the skills. The shape is divided for the ascertainment of the goals for all citizens.
    + 1  |  - 0

    Re: WTX

    22. August 2023 at 7:29
    all right
    + 0  |  - 0
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.