WriteRecord and ReadRecords problem

Forum / MIFARE SmartCard IC`s / MIFARE DESFire / WriteRecord and ReadRecords problem

  • 16. June 2016 at 13:41

    We have a problema with the commands WriteRecord and ReadRecord. In case we write the complete record, we can read all the records. But in case we write a part of the record(not using the complete size), we cann't recover all the records, we only can recover the newest.

    Is there a special character that we must to add to data in WriteRecord command?

    Thanks in advanced
    + 0  |  - 0

    Re: WriteRecord and ReadRecords problem

    15. October 2017 at 9:48
    Hello, have you solved your problem?

    You might want to share the configuration of the record size and length, so that we could have a look.
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.