Use mifare plus in sl3 for ndef message?

Forum / MIFARE general topics and applications / Use mifare plus in sl3 for ndef message?

Tagged: 

  • 10. August 2017 at 17:05
    It's possible to use mifare plus card in sl3 mode for ndef message. And in can be read by android smartphone?
    + 0  |  - 0

    Re: Use mifare plus in sl3 for ndef message?

    14. August 2017 at 9:43
    Hi Ilya,

    I only know about MIFARE Ultralight, Classic and DESFire as NDEF tag. For this we have application notes how to describe how to prepare the card for a NDEF tag:

    AN1303 - MIFARE Ultralight as Type 2 Tag

    AN1304 - NFC Type MIFARE Classic Tag Operation

    AN1305 - MIFARE Classic as NFC Type MIFARE Classic Tag

    You can configure the MIFARE Plus in SL1, which is the “MIFARE Classic” mode. Now the preparation for a Classic as NDEF should work.

    The TapLinx team
    + 0  |  - 0

    Re: Use mifare plus in sl3 for ndef message?

    14. August 2017 at 10:51
    Thanks for your reply. I already read about Classic, Ultralight an desfire

    But we already use mifare plus in sl3 mode for access control system and think about store vCard contact.
    + 0  |  - 0

    Re: Use mifare plus in sl3 for ndef message?

    16. August 2017 at 8:42
    Hi Ilya,

    I am afraid, but MIFARE Plus in SL3 is not defined by NFC Forum to be used as NDEF tag.

    Sorry,
    The TapLinx team

    + 1  |  - 0
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.