Taplinx with external NFC Reader

Forum / MIFARE general topics and applications / Taplinx with external NFC Reader

  • 17. September 2016 at 5:39
    Is it possible to use the Taplinx SDK with an external Bluetooth/USB NFC reader?
    + 0  |  - 0

    Re: Taplinx with external NFC Reader

    19. September 2016 at 11:21
    Hi Raghavender,

    The TapLinx SDK does not support an external reader, because there is no standardized interface for that. Of course, you can connect your device with an external USB or Bluetooth reader, but you have to implement the interface to this reader by our own.

    Please take in mind, TapLinx allows it to use any third-party hardware key store, even an own written “SAM AV2 hardware key store”. The only drawback for you is, to implement the code of managing the SAM via the third-party interface software of the reader manufacturer.

    The TapLinx Team
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.