SetConfiguration with AES authentication

Forum / MIFARE SmartCard IC`s / MIFARE DESFire / SetConfiguration with AES authentication

  • 14. December 2016 at 16:56
    Hi,

    Im tryng to SetConfiguration after authenticate with AES but I cant, the card alwasy response me with 0x1E. Can you give me more information about the secuencial steps to follow in this case.

    Thanks.

    writing my log below.


    SetConfiguration:

    AESsessionKEY:0x0, 0x0, 0x0, 0x0, 0x0, 0xe1, 0x60, 0x72, 0x6b, 0x0, 0x0, 0x0, 0x0, 0xb6, 0x94, 0x04, 0x18.
    keyIV: 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00.

    SetConfigurationCMD: 0x5c, 0x0, 0x0, 0x72, 0x10, 0xFD, 0x2D, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0.
    CMD: 0x5c.
    option: 0x0.
    data: 0x0.
    crc32(0x0): 0x72, 0x10, 0xFD, 0x2D.
    padding: 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0.

    ek(SetConfigurationCMD):0x5c, 0x0, 0xd9, 0xf4, 0x22, 0xb8, 0xfb, 0x1a, 0xe1, 0x83, 0x87, 0x54, 0x8e, 0xde, 0xa, 0xef, 0x65.

    Response: 0x80, 0x7, 0x2, 0x1e, 0xef, 0xd4, 0x8, 0x0, 0x0.

    thanks and regards.

    + 0  |  - 0
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.