SDK for Mifare Classic & Mifare Desfire card Programming

Forum / MIFARE general topics and applications / SDK for Mifare Classic & Mifare Desfire card Programming

Tagged: ,

  • 24. April 2017 at 8:11

    Malshan Anthony
    Dear all,

    Where can I get a SDK for mifare Classic or Mifare DESFire card programming?
    we are planning to build an access control system using Mifare DESFire ev2 cards using ACR1251U reader.
    So I'm wondering if I can get a SDK for that and updated source code samples .
    Thank You.
    + 0  |  - 0

    Re: SDK for Mifare Classic & Mifare Desfire card Programming

    24. April 2017 at 9:28

    TapLinx Support
    Hi Malshan,

    If you want to build a reader infrastructure based on ACR readers, then the first address is the driver package and interface library from this manufacturer.

    The only common standard for contact and contactless cards is the PC/SC interface which is partially supported by all manufacturers. But a lot of features are not possible with PC/SC, wherefore manufacturers offer their own driver interface.

    The TapLinx team
    + 0  |  - 0

    Re: SDK for Mifare Classic & Mifare Desfire card Programming

    24. April 2017 at 10:34

    Malshan Anthony
    Thank you for the quick reply.
    I will check it with ACS readers then.
    Thanks again.
    + 0  |  - 0
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.