Reading MIFare 1K Cards and Fobs MicroPython

Forum / MIFARE and NFC Reader IC`s / Reading MIFare 1K Cards and Fobs MicroPython

Tagged: 

  • 10. February 2023 at 3:25

    R Justy
    I'm looking for code samples of how to read and write to MiFare classic 1K cards using MicroPython. I have searched everywhere but haven't found any samples and helpful code snippets. Please help guide me. I'm using Raspberry Pi Pico I2C.

    Thank you for any help!
    + 0  |  - 0

    Re: Reading MIFare 1K Cards and Fobs MicroPython

    23. June 2023 at 4:05

    Ambrose Barrera
    I am trying to load the keys(keys for that particular campus cards which is of 6bytes) and is formatted to 12 bytes(based on the RC531 user manual). Load key is succeeded and trying to perform Authentication
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.