pn512 with booster, amplifier emvco specification receive problem

Forum / MIFARE general topics and applications / pn512 with booster, amplifier emvco specification receive problem

  • 20. March 2015 at 15:16
    Hi,

    I am developing a pn512 board for emvco certification but even I can reach the voltage and timing levels, I cant make the communication provided at 4cm distance. I need some details for receive path and register settings for both A and B types about CWGSN,MODGSN,MODGSP,CWGSP values, I have no ideo what should they be for an optimum level. I investigated the receive path and it is at about 2.5 volts but it cant manage to communicate. What could be the problem?

    Thanks in advance
    + 0  |  - 0
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.