NFC Reader Library version

Forum / MIFARE SmartCard IC`s / MIFARE Classic / NFC Reader Library version

  • 15. December 2014 at 16:56
    Dear Sir/Madam,

    I am working with a CLRC663 chip using a SAM4L processor which communicates with the CLRC663 chip through a SPI bus.

    I downloaded SW297832 software package from NXP webpage. This package is called NFC Reader Library V3.010 for CLEV663B - V3.010_R2.

    I ported the code to make the BAL layer compatible with our processor and board configuration. I did some tests and I was able to read MIFARE and JCOP cards on a simple way.

    A couple of weeks ago I found a newer package on NXP webpage, 200312 - NxpRdLibPublicReleas-2.1-windows-installer .

    I double checked the files of both packages and I saw that the ones in 200312 were dated on 2013 and the ones inSW297832 on 2011. So, I upgraded the NXP Reader library files to the latest one.

    As a result, the functions that worked on the SW297832 library did not work on the latest one.

    Could you please advice me about NFC Reader library versions?

    Thank you very much in advance.

    Kindest regards,

    Aritz M.
    + 0  |  - 0
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.