MiFare Ultralight C Value Blocks

Forum / MIFARE general topics and applications / MiFare Ultralight C Value Blocks

  • 7. June 2017 at 17:37
    Does MiFare Ultralight C card has a value block like the one exist in Mifare Classic ?
    If so, Does it have value commands like Increment,Decrement. I can't find such commands in the data sheet.

    + 0  |  - 0

    Re: MiFare Ultralight C Value Blocks

    9. June 2017 at 9:10
    Hi AbdElRahman,

    No, MIFARE Ultralight (C, EV1) does not support values types like the MIFARE Classic. You have to implement the increment or decrement with a combined read, change value and write back.

    The TapLinx team
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.