Mifare Plus Ev1 SL1 – returning 0x0b

Forum / MIFARE SmartCard IC`s / MIFARE Plus / Mifare Plus Ev1 SL1 – returning 0x0b

Tagged: 

  • 25. March 2020 at 15:48
    Hi guys,
    I am having two situations on Mifare Plus Ev1 SL1.

    The first one is when i use the card in APDU mode, every apdu that i send to card the response always be 0x0B

    The other situation is when i use the card in Classic mode, i can authenticate the sector with sucess, but i can't read nothing from there

    I tested the card in NXP TagInfo app and there the sector was read succefully

    The steps that i follow for read card are:
    Classic Mode
    1 - Detect card
    2 - Activate card
    3 - Authenticate sector
    4 - Read block

    Apdu mode
    1 - Detect card
    2 - Activate card
    3 - Send APDU
    + 0  |  - 0
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.