Mifare emulation – Block 0 autentication strategy

Forum / MIFARE general topics and applications / Mifare emulation – Block 0 autentication strategy

  • 15. June 2017 at 15:06
    Hi,
    I heard that it was not necessary to perform authenticate to read Sector 0 / Block 0 (manufacturer block). If I look at Mifare MF1S70YYX_V1 specification, it seems that only one use case is supported without authenticate.

    What is the truth . :-)

    Thanks for your answer
    + 0  |  - 0

    Re: Mifare emulation – Block 0 autentication strategy

    16. June 2017 at 8:52
    Hi Patrice,

    No, you have to authenticate to sector 0 before you can read block 0. Please note, only block 0 is read-only, but blocks 1 and 2 can be written.

    The TapLinx team
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.