Mifare DESFire EV1

Forum / MIFARE SmartCard IC`s / MIFARE DESFire / Mifare DESFire EV1

  • 4. March 2015 at 3:13
    I used NDEF Message and Mifare DESFire EV1 4K, Mifare DESFire EV1 8K.
    I mainly used the default Android SDK.
    I am considering using MIFARE SDK.
    But we have a single problem.
    MIFARE SDK Lite can not change the NDEF Message with software & hardware read-only?
    Please tell me if there was a way to be.
    + 0  |  - 0

    Re: Mifare DESFire EV1

    8. April 2015 at 13:31

    I am not sure if I understood your question correctly.
    But if you are asking, if you can write a NDEF msg on DESFire with MIFARE SDK Lite, then the answer is yes.

    Check this javadoc page for LITE version:


    And choose DESFire, you can see all the possible methods you can use with combining Lite SDK and DESFire Card.

    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.