Mifare DES Fire EV1 native command set

Forum / MIFARE general topics and applications / Mifare DES Fire EV1 native command set

  • 7. August 2016 at 15:04
    Hi,

    I'm relatively a newbie to the NFC and Mifare Cards world. I am currently analysing code which is meant to be used for a Mifare DESFire EV1 card. Currently the code does not support APDU wrapped commands (i.e. only ISO14443-A) and I am trying to find the native command set with which I can talk to the card. Anyone knows where I can find the resources needed to carry out the necessary steps?

    Thanks in advance!
    + 0  |  - 0

    Re: Mifare DES Fire EV1 native command set

    8. August 2016 at 11:36
    Hi Jennifer,

    You will find the MIFARE DESFire EV1 native command set in our full datasheet. This datasheet is NDA classified. Please write me to this address:

    mifaresdk@nxp.com

    I will hand over your request.

    Regards,
    The MIFARE Team

    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.