Forum / MIFARE SDK / Mifare classic card programming with an android device
I am working in a company which produces parking equipment and services. For our parking cards we use a Mifare classic standard.What we want is to have an opportunity to give certain clients a discount or a free service, to do it a worker should take his card and reprogram it. For this purpose, i know, there are special readers-writers, but most of them are rather expensive. So I wanted to know, if we can do this with an Android or Windows smartphone with an NFC module and a special software written for the purpose. Is it possible?
I didn't find the right solution from the Internet.
Custom Video Creation Service
+ 0 | - 0
Yes, this is possible. Unfortunately, not all devices support the MIFARE Classic by hardware. “By hardware” means that the NFC reader does not support the Classic. My recommendation is: install NXP TagInfo on your device and check, if a Classic is properly detected. In this case you know, that this particular device supports the Classic. Before you ask: it does not exist a list of all devices of any software to check the support.
You will find TagInfo on Google Play:
The TapLinx team
+ 0 | - 0
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.