Is MFRC500 Support Mifare Plus and Desfire in SL3?

Forum / MIFARE and NFC Reader IC`s / Is MFRC500 Support Mifare Plus and Desfire in SL3?

  • 12. July 2013 at 4:11

    macaps
    NXP RC500 support Read/Write Function on mifare plus / desfire
    Description: Do the NXP RC500 support Read/Write Function on mifare plus in SL3 / desfire Smart Card?

    If yes, do you have the link of source code for this?

    And would you mind provide any information of AES and MAD for Mifare Plus key authentication?
    + 0  |  - 0

    Re: Is MFRC500 Support Mifare Plus and Desfire in SL3?

    12. July 2013 at 11:09

    Renke
    Any NXP Reader IC is capable of operating the MIFARE Plus (in all SL) and the MIFARE DESFire. So of course the MFRC500 is able to operate the MIFARE Plus and the MIFARE DESFire, too.

    For the code supporting the full control you need to use the export controlled version of the NXP Reader Lib. For the access you need to have access to NXP Docstore, which you need to have to get e.g. the MIFARE Plus datasheet anyway.

    Regarding AES: All related info is given within the datasheet and the related application notes.

    Regarding MAD: There is a specification available, which describes the MIFARE Application Directory in detail, which includes the use of MAD with MIFARE Plus and / or MIFARE DESFire.
    http://www.nxp.com/documents/application_note/AN10787.pdf

    Renke
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.