Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

Forum / MIFARE SmartCard IC`s / Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

Tagged: 

  • 8. October 2018 at 13:12

    Tithi Patel
    Is MiFare SE or MiFare Plus cards support NDEF format encoding and all types of NDEF messages?
    + 0  |  - 0

    Re: Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

    15. October 2018 at 8:20

    TapLinx Support
    Hi Tithi,

    You can use a MIFARE product as NFC Forum compliant NDEF Tag.

    Please check:

    AN1303 - MIFARE Ultralight as Type 2 Tag

    AN1305 - MIFARE Classic as NFC Type MIFARE Classic Tag

    AN11004 - MIFARE DESFire as Type 4 Tag

    The TapLinx team
    + 0  |  - 0

    Re: Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

    9. July 2019 at 5:05

    sunny sunny
    The information you have posted is very useful. The sites you have referred was good. Thanks for sharing
    + 0  |  - 0

    Re: Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

    31. July 2019 at 8:50

    Onan Saha
    If NDEF data is written to a Mifare classic card, can then it be read with other NFC devices that do not have support for Mifare classic?
    + 0  |  - 0

    Re: Is MiFare SE cards support NDEF format encoding and all types of NDEF messages?

    5. August 2019 at 12:48

    TapLinx Support
    Hi Onan,

    You can only communicate with a MIFARE Classic if your hardware support it! Unfortunately, you cannot check it out if your device supports a Classic or not by software.

    Please have a look to this post:

    IMFClassic – authentication fails on SOME devices

    The TapLinx team

    + 0  |  - 0
  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.