IC Card Mifare 1K Card Procurement Assistance

[ataro]

I have to procure "IC Card Mifare 1K Card" for the 2FA on Windows to be used with AVR122U NFC Contactless Smart Card Reader

The vendor is asking the following questions.
1) Please advise the Bit number which will be used for Card programming?
2) Please provide the Format number for Card Programming?
3) Please provide the Facility Code for Card programming?
4) Please provide the card start number for card programming?
5) Please advise if Yes or No if you have verification of corporate 1000 Status?

I am not clear on these requirements, I need to use these cards with "Rohos Logon Software" for the 2FA on Windows systems. Please advise.

Thank you for your support.

---

+ 0  |  - 0

[TapLinx Support]

Hi Avil,

All these questions are part of the requirements you want to achieve. Which hardware device you will use in your two-factor authentication solution, is the result of the discussion with your customer to the requirements.

The TapLinx team

---

+ 0  |  - 0

[ataro]

Hi,
I am using Mifare card with Rohost software for Windows login. As per Rohos, all they need is just about 200-500 bytes in Mifare memory for normal operation.
So please advise what should be my answers for the following questions.

1) Please advise the Bit number which will be used for Card programming?
2) Please provide the Format number for Card Programming?
3) Please provide the Facility Code for Card programming?
4) Please provide the card start number for card programming?
5) Please advise if Yes or No if you have verification of corporate 1000 Status?

---

+ 0  |  - 0

[TapLinx Support]

Hi Avil,

Nobody from us can answer these questions. You must solve this with your remitter. We can answer only to technical questions regarding MIFARE and NTAG products.

The TapLinx team

---

+ 0  |  - 0

[Author]

Posts