How to approach MIFARE PLUS?

Forum / MIFARE general topics and applications / How to approach MIFARE PLUS?


  • 26. October 2017 at 20:44
    I'm currently making transportation card's balance checking application.
    But i don't know how to approach to data of the card.

    I sended ff ca 00 00 00 to get UID and ff ca 01 00 00 to get ATS by APDU . It did work.
    but we stucked in this situation and don't know how to go further.
    would you guys let me know where is 'How to' documents or get data apdu commands ?

    Image is my cards tagging data using NXPinfo(application).
    How can NXPinfo read balance of my card? is this possible?

    How can I know it's MIFARE plus or not?
    my card's atqa is 0x0400 and sak is 0x20 is this MIFARE PLUS?
    + 0  |  - 0

    Re: How to approach MIFARE PLUS?

    2. November 2017 at 13:14
    Hi Taeil,

    The screenshot you provided shows, that the tagged card is not a NXP product! I do not know why it is marked as “T money card”.

    The TapLinx team

    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.