How i can Authenticate with desfire EV2 for reading data

Forum / MIFARE and NFC Reader IC`s / How i can Authenticate with desfire EV2 for reading data

Tagged: , , ,

  • 11. October 2016 at 2:03

    Hiram
    Hi i can read the UID for a Mifare Desfire EV2 with RC522 Module connect over SPI with Arduino UNO, but now i can't read data because i don't know how authenticate with the card, please somebody can tell me how i can do that.

    I show in next image the serial port response since "IUD" but don't show the data, because i dont known how to make a correct authenticate.


    Best Regards.

    Hiram
    + 0  |  - 0

    Re: How i can Authenticate with desfire EV2 for reading data

    13. October 2016 at 9:22

    TapLinx Support
    Hi Hiram,

    Reader related topics are better located in this forum:

    http://www.nxp.com/support/sales-and-support:SUPPORTHOME

    Regards,
    The TapLinx Team
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.