How to change parity bits manually with RC522

Forum / MIFARE and NFC Reader IC`s / How to change parity bits manually with RC522

  • 30. October 2014 at 8:47

    mos
    By default, the parity bits are handled by RC522 automatically. How to change it manually? I think we need some sort of Transive_By_Bit function and disable parity bits auto-generation.
    + 0  |  - 0

    Re: How to change parity bits manually with RC522

    17. December 2014 at 15:07

    Renke
    Parity bits cannot be handled manually.
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.