DESFireEV1 WriteData error:"Boundary Error"

Forum / MIFARE SDK / DESFireEV1 WriteData error:"Boundary Error"

  • 12. January 2017 at 16:48
    Hi,

    I'm trying to write one byte with offset in a BackupDataFile, and always receive the same response "Boundary Error". I've confirmed that the data are correct and the offset is correct.

    Do you have any idea about the error?

    Thanks in advanced
    + 0  |  - 0

    Re: DESFireEV1 WriteData error:"Boundary Error"

    13. January 2017 at 16:57
    Hi Jesús,

    If you write to backup files, you have terminate the session either with CommitTransaction() or with AbortTransaction(). Please have a look into the datasheet and study the differences between standard data files and backup files.

    The TapLinx Team

    + 0  |  - 0

    Re: DESFireEV1 WriteData error:"Boundary Error"

    6. February 2017 at 16:09
    Hi,

    Yes I know that situation. The problem is that the WriteData command launchs the exception.
    + 0  |  - 0

    Re: DESFireEV1 WriteData error:"Boundary Error"

    7. February 2017 at 13:52
    WordPress › Error

    There has been a critical error on this website.

    Learn more about troubleshooting WordPress.