DESFire Personalize vs Authenticate

Forum / MIFARE SDK / DESFire Personalize vs Authenticate

  • 23. July 2014 at 2:25

    I'm trying to read the unencrypted, free-read area (File ID 0x07) of a DESFire EV1 card using the Lite SDK. Prior to calling read the library is enforcing that I either authenticate or personalize. The documentation for the personalize function states that "No preceding authentication is required." yet it requires the PICC master key, app ID, and the AES Secret key of the application to personalize with. Then the personalize function calls authenticate anyway.

    How can I access the free read area of a DESFire EV1 card using the Lite SDK and what information do I need?
    + 0  |  - 0

    Re: DESFire Personalize vs Authenticate

    7. August 2014 at 12:47
    Hi Joel,
    This feature is not supported in Lite SDK even though it is free read area. You will need to wait for the advanced version.

    Thank you.
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.