Configure Mifare Plus SL3

Forum / MIFARE SmartCard IC`s / MIFARE Plus / Configure Mifare Plus SL3

  • 24. April 2014 at 15:04

    I signed few days ago the password request form , because i needed to communicate with the Mifare Plus.
    To continue my discovery of this RFID card, I want to configure it and implement more security, for example the proximity check feature implemented on your product.

    Even if it is introduced in the document AN10840_MIFAREPlusMigration_172201, I can't find a technical way to configureit , and I don't know how it would work with the PC activated.

    Did I miss some documents ? Could you help me to go back on trail ?

    I have a Mifare Plus 4k SL3

    Thank you

    Best regards

    Stephane C.
    + 0  |  - 0

    Re: Configure Mifare Plus SL3

    28. April 2014 at 11:01
    Hi Stephane,
    MIFARE Plus X offers Proximity Check features in SL3. By default it is optional, but you can make it mandatory using Field Configuration Block.
    How to work with PC activated or how PC works are described in Datasheet (page 34 and page 76).
    You can get the Datasheet from our docstore.
    + 0  |  - 0
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.