Changing security level

Forum / MIFARE SmartCard IC`s / MIFARE Plus / Changing security level

  • 4. March 2015 at 8:45

    amathur
    Hi,

    I am trying to use Mifare Plus cards but am having a very hard time finding any relevant information. I would like to change the security level from 0 to 1 and all I can find is mention of the Write perso command.

    Can anyone please point me to any document that clearly explains what this command looks like and any links to a reference implementation would be greatly appreciated.

    Thanks

    Amitabh
    + 0  |  - 0

    Re: Changing security level

    13. May 2015 at 16:34

    mifaresdk
    Hi Amitabh,

    after personalizing with SL0 you can move up to SL1, SL2 and SL3.

    You will find datasheets of the MIFARE Plus products on the NXP public web server:

    http://www.nxp.com/products/identification_and_security/smart_card_ics/mifare_smart_card_ics/mifare_plus/#products

    Best Regards,
    The MIFARE Team
    + 0  |  - 0
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.