Forum › MIFARE SmartCard IC`s › MIFARE DESFire › Using PN512 to communicate with Mifare Desfire EV1 card › Re: Using PN512 to communicate with Mifare Desfire EV1 card
Dear Trong Quyen,
have you implemented the T=CL protocol (ISO/IEC 14443-4)?
The MIFARE DESfire card supports the ISO/IEC 14443-4, which requires the correct use of I-blocks, R-blocks and S-blocks.
Typically command and data is transferred as "payload inside an I-block", i.e. as "information field".
BTW: You can "simulate" this with the MFDiscover and the RD710, using the exchange of data fields in the ISO/IEC 14443 Layer 3 tab and / or the ISO/IEC 14443 layer 4 tab.
BR,
Renke
have you implemented the T=CL protocol (ISO/IEC 14443-4)?
The MIFARE DESfire card supports the ISO/IEC 14443-4, which requires the correct use of I-blocks, R-blocks and S-blocks.
Typically command and data is transferred as "payload inside an I-block", i.e. as "information field".
BTW: You can "simulate" this with the MFDiscover and the RD710, using the exchange of data fields in the ISO/IEC 14443 Layer 3 tab and / or the ISO/IEC 14443 layer 4 tab.
BR,
Renke
+ 0
|
- 0