Forum › MIFARE SmartCard IC`s › MIFARE DESFire › I cant change key › Re: I cant change key
Hi,
from the log I see that the authenticate was successful. Then you select application ID 000000. Then the log show data bytes sent to the PICC. It seems that you do not use the ChangeKey command properly.
Best regards,
The MIFARE Team
from the log I see that the authenticate was successful. Then you select application ID 000000. Then the log show data bytes sent to the PICC. It seems that you do not use the ChangeKey command properly.
Best regards,
The MIFARE Team
+ 0
|
- 0