Forum › MIFARE general topics and applications › Different numbers being read on different types of readers › Re: Different numbers being read on different types of readers
Hi Jim,
you can check if the card number is the ID reading the first 4 bytes of the block 0 of sector 0 (manufacturer block), see figure 6 of http://www.nxp.com/documents/data_sheet/MF1S50YYX.pdf
To read this out you can use for example teh NXP Pegoda reader with MIFARE Discovery (see NXP web-site) or any NFC Android phone using the NXP TagInfo application from the Google Play store.
Regards
Francesco
you can check if the card number is the ID reading the first 4 bytes of the block 0 of sector 0 (manufacturer block), see figure 6 of http://www.nxp.com/documents/data_sheet/MF1S50YYX.pdf
To read this out you can use for example teh NXP Pegoda reader with MIFARE Discovery (see NXP web-site) or any NFC Android phone using the NXP TagInfo application from the Google Play store.
Regards
Francesco
+ 0
|
- 0