Forum › MIFARE SDK › I need help to go from SL1 to SL3 in Mifare plus s Tag with PN532 chip › Reply To: I need help to go from SL1 to SL3 in Mifare plus s Tag with PN532 chip
Hi Miguel,
We must divide your request into two parts:
The MIFARE Plus switch should be done on a “stupid” reader where you can send also ISO14443-3 and ISO14443-4 protocol commands.
The TapLinx team
We must divide your request into two parts:
- The PN532 reader is not supported by our team. Please contact this support site:
NXP Reader Support - The MIFARE Plus SL switching includes a protocol change from ISO14443-3 to ISO14443-4. Therefore, you cannot do this in reader device with own middleware. The middleware tries to find out which card is in the field and does not allow to change the protocol after a valid setting was found.
The MIFARE Plus switch should be done on a “stupid” reader where you can send also ISO14443-3 and ISO14443-4 protocol commands.
The TapLinx team
+ 0
|
- 0